For other destinations, please email firstname.lastname@example.org and we will send you a tailor made quotation
for the delivery to your country including directions on how to make a payment direct to Paypal.
Your chosen currency option is only an approximate amount based upon Yahoo! Exchange rates against the US Dollars.
Final prices upon checkout will still be reflected in USD.
A solid mahogany desk stand is included in the price of the model.
Production approximately 8-10 weeks from date of order confirmation
MODEL SHIPPING OPTIONS
Fedex International Economy (3-4 Days Delivery)
Fedex International Priority (2-3 Days Delivery)
Philpost Air Parcel option is also available (14-21 days trackable), please email email@example.com to get a quote.
Shipping via Air Parcel is normally up to 50% lower than the FedEx cost.
Our website does not currently allow for multiple orders of the same model or discounted shipping for more than one model.
If you require more than one model of the same type or multiple models please email us first on firstname.lastname@example.org,
and we will email you PayPal request showing the reduced shipping charges.
The USS Macon and her sister ship the USS Akron were designed and constructed by Goodyear-Zeppelin Corporation. Unlike todayÂ’s blimps, the dirigibles had sturdy frames and internal hulls. The USS Macon and USS Akron were called rigid airships because they were made of these rigid structures. These structures provided overall strength and tremendous access to interior portions of the dirigible. On the inside of the rigid airships, catwalks and girders allowed crewman to traverse the interior.
Top: Erecting the AkronÂ’s first main frame ring. Bottom: USS Akron under construction.
In addition to catwalks and girders, the USS Macon and USS Akron also had internal hangars located about two-thirds of the way behind the nose of the airship. The airships could launch and retrieve five aircraft through a T-shaped opening in the floor of the hangar. Launching and retrieving the planes was a miraculous feat! A welded metal hook called a Â“sky hookÂ” was attached to the top of each plane and was used to attach the plane to a trapeze. The trapeze and plane were lowered through the hangar floor. Pilots then had to rev up their engine RPMs, yank a release lever, and drop into the air mid-flight.
For the dirigible to retrieve the planes, pilots had to match their speed to the dirigible and gently guide the small hook back onto the trapeze. The plane was the lifted back into the dirigible. Sparrowhawk pilots were called the Â“men on the flying trapezeÂ” due to their mid-air maneuvers.
The Sparrowhawk planes operated as eyes for the large airships. More maneuverable and capable of greater speed than the dirigible, the planes could scout large areas allowing the dirigible to remain far from enemy fighter planes.
USS Macon Facts
[modified, with permission, from the Moffett Field Historical Society]
The Macon, unlike the blimps made today, had a structured duraluminum hull with three interior keels. The intent of the strong spine was to prevent a hull collapse. From the outside it looked and functioned much like a large blimp. On the inside, the ship was an open cavern of girders, cables and catwalks with few places where the crewmen could not go.
The Macon was 785 feet long, just 97.5 feet shorter than the RMS Titanic and over four times the length of todayÂ’s Goodyear blimps. Link to Goodyear blimp site here.
When carrying Sparrowhawks and personnel, the Macon weighed more than 400,000 pounds or the equivalent of two 100-ton blue whales.
The Macon had accommodations for 100 officers and men, including sleeping berths, a large mess room, a galley, and observation platforms at the nose and tail.
The Macon and her sister ship the Akron were kept aloft by non-flammable helium contained in twelve large cells inside the craft. The German airship Hindenburg was kept aloft by hydrogen, a more flammable gas than helium, and burst into flames on May 6, 1937.
The Macon needed 6.5 million cubic feet of helium to become airborne. This is roughly equivalent to 216,666 bathtubs (measuring 5 feet by 3 feet by 2 feet) full of air.
The Macon could fly at a top speed of eighty miles per hour. Flying at top speed it would take over 37 hours for the Macon to cross the United States.
The Macon had eight large 560-horsepower gasoline powered German built Maybach reversible engines driving outside propellers. The MaconÂ’s propellers could be rotated down or backwards to control the ship during take-off and landings.
The Macon was housed at Moffett Field in Sunnyvale, California in 1934 and 1935. During her sixteen-month stay, the Macon became a familiar and popular sight.
Moffett Field was named in honor of Navy Chief of Aeronautics Admiral, William A. Moffett who championed the lighter-than-air program and who was lost in USS Akron crashed.
The Macon was the product of the Goodyear-Zeppelin Corporation, a business jointly owned by the Zeppelin Company of Germany and the Goodyear Tire and Rubber Company.
The Macon was equipped with a scouting oddity known as the Â“spyÂ” car. A cable would lower the amusing-looking compartment from the airship to a point below cloud cover up to 1,000 feet. A crewman inside the spy car would then telephone back to the main control room relaying navigational information. The car acted as a sort of reverse periscope.
General Product Information
Our USS ZRS-5 Macon scale model airship exhibits unique, unrivalled quality and detailed design to come as close as possible to the accuracy of the actual ship. It comes standard with a robust , durable solid mahogany base or stand and will be ready within about 28 - 35 days from placement of order.
The ZRS5 model airship is made of the finest kiln dried renewable mahogany wood (commonly known as Lauan or Meranti) which has undergone many stages of carving and meticulous and careful sanding giving the beautiful finished museum quality masterpiece. Many collectors and model connoisseurs demonstrate their preference for genuine hand made mahogany wood models rather than plastic, resin or die cast (diecast) alternatives due to the overall look and totally different feel of the item - we trust you will find the same. Our craftsmen and gifted artisans ensure that our finely handcrafted model airships match the precise blueprint details of the original ship. The ZRS 5 model airships paint scheme, markings and parts are closely matched, reflecting the original ZRS-5 . This top-quality ZRS5 replica will surely enthral anyone who receives this stylish desktop display as a gift. This ZRS5 model airship is for sure one of the most appropriate and desirably collectible gifts for every aviation enthusiast and avid airship, dirigible or blimp collector whilst also displaying a perfect resemblance to the actual USS ZRS-5 Macon.
We can also make bespoke scale replicas of any other private / civil commercial airliner or airliners, helicopter, glider, gliders with engines, military jet, warplane jets, propeller warplanes, biplane, triplane, tail fin, spacecraft, rocket or NASA model you require in any airline, military or civilian livery or colors. We also produce boat,and ship collectibles. Wall plaque or seal for military, government or private customers. Although not made from wood but from aluminium or aluminum we also produce Aviation Nose Art Panel or Panels. Wholesale and retail inquiries welcome.
Trademark and Copyright Notice: Paypal, Yahoo Messenger and MSN Messenger and other related entities. All rights reserved.
Paypal, Yahoo Messenger and
MSN Messenger graphics and other materials
available here are protected by the copyright
and trademark laws of their respective companies and is not
related or affiliated in anyway to the aforementioned companies.